Clock Movements / Clock Hardware - Extreame Savings! Save up to 41%


Extreame Savings! Up to 41% off on Clock Movements (in Clock Hardware) at Kokos Lock & Key [141]. Top brands include Takane, QWIRLY, TIKROUND, Qwirly, Hicarer, Bjerg Instruments, Hansen, KEVNATSS, Generic, Seiko, & A-n-b collectibles. Hurry! Limited time offers. Offers valid only while supplies last.



Takane Thin Mini Clock Movement And Pendulum Kit - Clock Repair Kit - Choose a Size
By Takane
In Stock
$17.26
$10.24
You Save: 41%

mpn: B00LXIRHRC, ean: 0640052986527,

4.3 out of 5 stars with 52 reviews
Pendulum movement, made by Takane. The Case Size is 3-1/2''H x 2-1/8''W x 7/8'' Deep. Shaft diameter is 5/16''. Requires 1 'AA' battery, not included. Rear hand set knob for setting the time. Includes all mounting hardware, a metal wall hangar, an adjustable pendulum and bob, and hour and minute hands (upon request only, sweep sold separately). This movement is capable of running up to a 23'' battery pendulum.***For hands: click on blue ''sold by'' link above (it should say ''Ronell Clock Co'').


Replacement Battery Quartz Movement for Hermle 2114, 2115 or Any Clock, DIY Clock Kit with Howard Miller 354475 / Kieninger QQA20, 21mm Shaft Length
By QWIRLY
In Stock
$86.50
4.3 out of 5 stars with 34 reviews
Battery quartz movement, uses 2 C batteries (batteries not included). Part number 354471. Westminster, Ave Maria electronic chime with 4/4 or hour only selection. 16mm stem length. 66mm diameter speaker with 22mm diameter magnet. 32cm speaker wires, Night shut off, volume control. Kieninger part QQA10.Howard Miller 354477 / Kieninger QQA20 Battery quartz movement.. Uses 2 C batteries to operate. Batteries are NOT included. This is a direct replacement for the Hermle 2114 and 2115 models which ar


Replacement Battery Quartz Movement for Hermle 2214, 2215 or Any Clock, DIY Clock Kit with Howard Miller 354477 / Kieninger QPA22 Heavy Pendulum Strong Coil Unit, 21mm Shaft
By QWIRLY
In Stock
$98.00
4.1 out of 5 stars with 60 reviews
BRAND NEW Kieninger / Howard Miller dual chime wall quartz clock movement. Howard Miller model number 354477. This is a direct replacement for the Hermle 2214 and 2215 models which are no longer in production. Choice of Westminster or Ave Maria chimes. Plays ascending chiming melody on each 1/4 hour, then plays the full melody at the top of the hour, then strikes the hour after playing the full melody. Can also be set to play just the full Westminster melody plus the hour strike at the top of th


TIKROUND Original Youngtown 12888 Chime Melody Pendulum Clock Movement with 2 Sets of Hands 23.5mm (59/64 Inch) Shaft Length 16mm (5/8 Inch) Thread Length.
By TIKROUND
In Stock
$20.99

mpn: TIKROUND-M-077,

4.5 out of 5 stars with 34 reviews
Features: Kindly note: the product has 3 hands. The second hand has a brass cap, instead of the minute nut. For the 8th tip in the instruction, lightly screw minute nut in place can mean that if the product has the second hand, this minute nut or brass cap needn't. Please note that our package does not include the minute nut. Easy and simple design. Suitable for repairing, replacing or making a clock. Material: plastic and aluminum. Accuracy Within ±30seconds deviation each month (in normal


Hermle 2114, 2214, 2215 or 2115 Replacement or DIY Clock Chiming Quartz Movement by QWIRLY - Westminster and Ave Maria Chimes, Night Shut Off and Volume Control, 23mm Shaft Length
By Qwirly
In Stock
$72.00

ean: 0680599271366,

4.2 out of 5 stars with 41 reviews
Hermle has stopped manufacturing the quartz movements 2214, 2114 and the 2115, 2115 quartz movements. This quality movement designed and manufactured by an American company is as an excellent replacement. This battery operated clock movement is very similar to the old Hermle movement and has superior sound quality. This Quartz Clock Movement plays two of the most popular melodies, Westminster Chime and Ave Maria, with a crisp and clear sound. Remote two inch quality speaker system that can be m


Takane Clock Movement Extra Spacing High Torque - Non-Pendulum - For Large Hands - Clock Repair Kit -
By Takane
In Stock
$17.97
$11.34
You Save: 37%

ean: 0640052986763,

4.4 out of 5 stars with 47 reviews
Increased distance between the hour and minute hands on the shaft to prevent binding. It can power up to 17-1/2'' hands!! Case Size: 2-1/4''W x 3-1/8''H x 1'' Deep. The shaft diameter is 7/16''. Requires 1 'C' Cell battery, not included. Includes one pair of hour and minute hands (upon request only), and all mounting hardware (sweep sold separately). A large sweep second hand is not recommended. If you want extra large hands for this movement they are sold separately in our Amazon store and rang


Hicarer High Torque Clock Movement Mechanism Long Shaft with 12 Inch Hands
By Hicarer
In Stock
$21.99

mpn: Hicarer- Clock Movement-01,

4.8 out of 5 stars with 46 reviews
High Torque Clock Movement Mechanism Long Shaft with 12 Inch Hands Features: Total shaft length is 28 mm and its thread length is 15.4 mm, applicable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel. Application: You can use the clock movement to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Easy and simple design: The component parts are easy to assemble together and the pure color metal hands can be


Bjerg Instruments 5 Pack Bulk Clock Parts with Replacement Movement Mechanism and Hands for 9 or 10 inch Clock (Modern)
By Bjerg Instruments
In Stock
$29.99

ean: 0745560117972,

4.2 out of 5 stars with 53 reviews
Be careful! Aluminum clock hands are very fragile. Handle with care during installation or you can bend them. You can use this 5 pack to repair, replace or make a clock, whether your clock is cross-stitch, three-dimensional embroidery, craft, frameless or wood, etc. Easy and simple design: The component click parts from this 5 pack ares easy to assemble together and the clock hands may be painted any color to match your clock if you really want to get detailed. Most people install them plain bla


Hicarer Quartz Pendulum Trigger Clock Movement Chime Music Box Completer Pendulum Clock Kit with 3 Pairs of Spades, Fancy, Straight Clock Hands
By Hicarer
In Stock
$18.99

mpn: Hicarer- Clock Movement-01,

4.4 out of 5 stars with 51 reviews
Quartz Pendulum Trigger Clock Movement Chime Music Box Completer Pendulum Clock Kit with 3 Pairs of Spades, Fancy, Straight Clock Hands Features: Total shaft length is 17 mm/ 0.67 inches, thread length is 9.7 mm/ 0.38 inches; Jump second movement, suitable for 2 - 6 mm/ 0.08 - 0.24 inches thickness clock panel. Application: You can use the clock movement to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.. Packag


Quartz Clock Movement and Pendulum Set
By Takane
In Stock
$17.99
$15.99
You Save: 11%

mpn: MVT2204TA W/BR R,

4.8 out of 5 stars with 56 reviews
Use this set for any clock blank with a face up to 3/8'' thick.This quartz clock movement and pendulum set operates on one AA battery (not included). Can be used on any clock blank with a face up to 3/8'' thick. Hands Sold SeparatelyComplete with Mounting Hardware: Hanger, Rubber Washer, Brass Washer, Hex Nut and Hand Nut. 7/16'' Threaded Shaft Length; 3/4'' Total Shaft Length. Made in U.S.A.. Requires 1 'AA' Battery (Not Included).


33-217 Hansen Synchron Motor Type "c" Electric Movement 1"shaft, Rear Set CM
By Hansen
In Stock
$60.49

ean: 6219465222146,

4.4 out of 5 stars with 42 reviews
Hansen heavy duty brass electric movement with rear set. 1'' Shaft length is measured from top of brass plate to tip of shaft.33-217 Hansen Synchron Motor Type ''c'' Electric Movement. 1'' shaft, Rear Set CM. center mount. 1'' Shaft length is measured from top of brass plate to tip of shaft.. This unit will have a 1 rpm 110v 60c motor that will have A43ra-6 stamped around the side of the canister.. Size is 3''W x 3 1/4''H x 2 1/8''D.


Kieninger QPA32 / Howard Miller 354476 Replacement Grandfather Floor Clock Movement by QWIRLY - Compatible with Hermle 2214, 2215W and 2215 Battery, Quartz, 2 Chime
By QWIRLY
In Stock
$98.00
4.6 out of 5 stars with 55 reviews
BRAND NEW Kieninger / Howard Miller dual chime wall quartz clock movement. This is a direct replacement for the Hermle 2214, 2215W and 2215 models which are no longer in production. Choice of Westminster or Ave Maria chimes. Plays ascending chiming melody on each 1/4 hour, then plays the full melody at the top of the hour, then strikes the hour after playing the full melody. Can also be set to play just the full Westminster melody plus the hour strike at the top of the hour, without playing the


KEVNATSS Takane Chime Pendulum Quartz Battery Movement with Hands to fit a 3/8" Dial
By KEVNATSS
In Stock
$56.96

ean: 0739955291798,

4.6 out of 5 stars with 37 reviews
Takane Westminster Chime Pendulum Movement with built in speaker to fit a 3/8'' Dial. Overall shaft 3/4 '' threaded shaft 7/16'' for 3/8'' Dial.for 3/8'' Dial.. Overall shaft 3/4 '' threaded shaft 7/16''. Takane Westminster Chime Pendulum Movement with built in speaker to fit a 3/8'' Dial..


Seiko 4/4 Westminster & Whittington Chime Movement - Pendulum Movement - Clock Repair Parts Kit (Short Shaft)
By Generic
In Stock
$42.88

ean: 0099654191165,

4.6 out of 5 stars with 43 reviews
Seiko 4/4 Westminster/Whittington Chime Movement for 5/16'' thick dials. These are brand new Genuine Seiko Movements. This is for the 'R' regular shaft that will fit up to 5/16'' thick dial, total shaft to tip measures approx 5/8''. Has about a 12'' pigtail wire for mounting speaker remotely. They Chime every quarter hour, and then after chiming on full hour, strikes the hour. I highly recommend mounting the speaker on the case and not leaving it attached to the movement, the sound will be much


Seiko 4/4 Westminster & Whittington Chime Movement - Pendulum Movement - Clock Repair Parts Kit - Choose a size -
By Seiko
In Stock
$42.88

mpn: 16602, ean: 0640052986732,

4.2 out of 5 stars with 48 reviews
Westminster or Whittington Chimes. It chimes every quarter hour then has a counting strike on the hour. Features include volume control and automatic night silence between 11pm to 5:45am. Movement case size is 3-1/4''W x 4-1/2''H x 1''D (1-3/4'' deep with speaker attached). Shaft lengths below: Short = Threaded Shaft length of 3/8'', overall shaft length of 5/8'' Long = Threaded shaft length of 13/16'', overall length of 1-1/8'' Shaft diameter is 5/16'' (8mm). Rear hand set knob for setting the


Seiko Electronic Dual-chime Clock Movement, Short Shaft, Non-pendulum (3-1/8" Hands)
By Seiko
In Stock
$39.88
4.2 out of 5 stars with 30 reviews
Seiko Electronic Dual-chime Clock Movement, Short Shaft, Non-pendulum (3-1/8'' Hands)Seiko Electronic Dual-chime Clock Movement, Short Shaft.


Quartz Clock Pendulum Movement 1" Shaft W/hands
By A-n-b collectibles
In Stock
$17.99

ean: 1699899002463,

4.5 out of 5 stars with 33 reviews
Requires AA battery - not included. Minute hand length equals 4'' and fits a dial width of approx 8''Shaft length 1''. Size 3 3/8'' H x 2 1/8'' W x 11/16'' D. Dial Thickness 3/8'' to 1/2''. Includes Pendulum and Hands (hands not pictured). Made in USA.


1" Gold Arabic Number Set - 10 Pack
By Generic
In Stock
$12.88

ean: 0099654190731,

4.9 out of 5 stars with 42 reviews
10 SETS OF 12 NUMBERS - Self adhesive, hot stamped, snap off. Hot stamped plastic number set, black base with GOLD on top. 1'' tall numbers, 2 mm thick, Arabic, numbers 1-12. Self adhesive but may need more adhesive depending on application. Used for clock faces. Snap off and stick. Clock number placement template included. Brand new, we do not sell used items.10 SETS OF 12 NUMBERS - Self adhesive, hot stamped, snap off. Hot stamped plastic number set, black base with GOLD on top. 1'' tall numbe


Youngtown 12888 High Torque Quartz Clock Movement Replacement Parts with 350 mm/ 13.78 Inches Long Spade Hands
By TIKROUND
In Stock
$13.99

mpn: TIKROUND-M-067,

4.2 out of 5 stars with 56 reviews
Features: Kindly note: Young town manufactures the 12888 series in various models,no all the model 12888 has the same size,so please compare the detail sizes between your old one and this one before order. Easy and simple design Suitable for repairing, replacing or making a clock Material: plastic and aluminum Second hand motion: Step Accuracy Within ±30seconds deviation each month (in normal temperature) Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline ba


Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 2 Long Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length.(2 Sets)
By TIKROUND
In Stock
$17.99

mpn: TIKROUND-M-082,

4.7 out of 5 stars with 24 reviews
Features: Kindly note: This clock Mechanism can not install the second hand. Easy and simple design Suitable for repairing, replacing or making a clock Material: plastic and aluminum Second hand motion: Step Accuracy Within ±30seconds deviation each month (in normal temperature) Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement. Dimensions: Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 in



Viewing Page 1 of 2

Browse Our Catalog