Expansion Shield Anchors / Anchors - Huge Savings! Save up to 17%


Huge Savings! Up to 17% off on Expansion Shield Anchors (in Anchors) at Kokos Lock & Key [217]. Top brands include Wej-It, CONFAST, HILTI, POWERS FASTENERS, INC., Simpson Strong-Tie, GARGON, Shorpioen, RAW PRODUCTS CORP, INDEX Fixing Systems, Fischer, Powers Fasteners, & Hard-to-Find Fastener. Hurry! Limited time offers. Offers valid only while supplies last.



Wej-It MS14 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 7/8" Length, 1/4"-20 Threads (Pack Of 100)
By Wej-It
In Stock
$44.99

mpn: MS14, ean: 0798167823715,

4.0 out of 5 stars with 54 reviews
The Wej-It MS14 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. It can be used to anchor within uneven holes and soft materials, and its antimonial lead sleeve and zamac alloy cone resist rust for extended use.Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands


CONFAST 3/8" (Inside/Screw 3/8" Diameter) Double Expansion Anchor (50 per Box)
By CONFAST
In Stock
$59.99

mpn: DE38,

4.8 out of 5 stars with 34 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Moist environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2''. Therefore, the anchor mu


Hilti KWIK Bolt 3 Expansion Anchor - Hard-Dipped Galvanized - KB3 3/4" x 8" - 378091- Box of 10
By HILTI
In Stock
$156.42

mpn: 378091,

4.4 out of 5 stars with 12 reviews
Hole Diameter: 3/4 in Anchor Length: 8 in Thread Length: 5-3/4 in Allowable Loads (Greater Than/Equal To 4000 psi Concrete): Embed Depth: 4-3/4 in Tension (lb): 4970 Shear (lb): 5340 For Base Materials: Lightweight Concrete, Uncracked Concrete, Lightweight Concrete over Metal Deck, Grout-filled Block Anchor Material: Carbon Steel, Hot-dip Galvanized (min 43 microns) Box Quantity: 10 Hilti Part Number: 378091 Listings and Approvals: ICC-ES (International Code Council) - ESR-1385 (AC01 Masonry), E


3/8", Powers Hollow-Set Dropin Internally Threaded Expansion Anchors, Zamac Body with Carbon Steel Cone, 50/Bx
By POWERS FASTENERS, INC.
In Stock
$119.65

mpn: 9340,

4.6 out of 5 stars with 33 reviews
3/8'', Powers Hollow-Set Dropin Internally Threaded Expansion Anchors, Zamac Body with Carbon Steel Cone, 50/Bx


Simpson Strong Tie ESA37 Simpson Strong-Tie Expansion Screw Anchor 3/8-inch Screw 1-1/4-inch Embeded Depth 50 per Box
By Simpson Strong-Tie
In Stock
$74.50

mpn: ESA37, ean: 0044315724411,

4.9 out of 5 stars with 48 reviews
The ESA was original internally threaded mechanical anchor design. The malleable lead shield allows for secure mounting. Installation Instructions: Drill a hole in the base material using the appropriate diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/8-inch for flush mounting. Blow the hole clean using compressed air. Overhead installations need not be blown clean. Insert anchor into hole. Using a piloted setting punch, drive expander


Hilti 3/4 in. x 8 in. Kwik Bolt Tension Zone Carbon Steel Expansion Anchors (10-Piece)
By HILTI
In Stock
$251.76

ean: 7613024019298,

4.3 out of 5 stars with 20 reviews
Hilti's line of Kwik Bolt Tension Zone Carbon Steel Expansion Anchors are excellent for use in a variety of base materials, such as concrete (cracked), concrete (light weight), concrete (light weight over metal deck) and concrete (untracked). These Kwik Bolt Tension Zone Anchors are most commonly used for fastening structural steel, facade, mechanical equipment, hand rails and racks. Professionals know the importance of qualified, reliable anchors and Hilti knows how to meet professionals' needs


Hilti KWIK Bolt 3 Expansion Anchor - Carbon Steel - KB3 3/4" x 4-3/4 " - 282535- Box of 10
By HILTI
In Stock
$79.99

mpn: 282535, ean: 7613023249559,

4.1 out of 5 stars with 33 reviews
Hilti KWIK Bolt 3 Expansion Anchor - Carbon Steel - KB3 3/4'' x 4-3/4 '' - 282535- Box of 10Hilti KWIK Bolt 3 Expansion Anchor - Carbon Steel - KB3 3/4'' x 4-3/4 '' - 282535- Box of 10.


Hilti KWIK Bolt 3 Expansion Anchor - Carbon Steel - KB3 3/4" x 5-1/2 " - 282536- Box of 10
By HILTI
In Stock
$97.24

mpn: 282536, ean: 0785497124254,

4.6 out of 5 stars with 29 reviews
Hole Diameter: 3/4 in Anchor Length: 5-1/2 in Thread Length: 3-1/4in Allowable Loads (Greater Than/Equal To 4000 psi Concrete): Embed Depth: 4-3/4'' Tension (lb): 5285 Shear (lb): 5495 For Base Materials: Lightweight Concrete, Uncracked Concrete, Lightweight Concrete over Metal Deck, Grout-filled Block Anchor Material: Carbon Steel, Electroplated Zinc (min 5 microns) Box Quantity: 10 Hilti Part Number: 282536 Listings and Approvals: ICC-ES (International Code Council) - ESR-1385 (AC01 Masonry),


Best Quality Bow Anchor Roller Stainless Steel Self Launching Heavy Duty Boat Marine, Anchor Stainless Steel - Bow Roller, Anchor Bow, Anchor Roller Wheel, Stainless Steel Marine Roller
By GARGON
In Stock
$51.99

mpn: W7OAZS83KTWLJB7RT1IW, ean: 0707209314586,

4.1 out of 5 stars with 53 reviews
Length: 197mmQuantity: 1pcsSuitable for: boatPackage Contents:1x Marine hardware accessoriesOnly the above package content, other products are not included.EXCELLENT MATERIAL: Professional for bow anchor roller stainless steel self launching heavy duty boat marine, wear resistance, good storage, allows you to use for a long time. PRODUCT SPECIFICATIONS: Pad Material: 316 Stainless steel, Usage: Home DIY, Model Number: Rail Fitting with Rectangular Base, is_customized: Yes. CONVENIENT FOR USING:


SHORPIOEN Short Single Expansion Anchor Zamac Alloy 5/8 BC-62AES (Box of 25)
By Shorpioen
In Stock
$77.71

mpn: BC-62AES,

4.7 out of 5 stars with 21 reviews
SHORPIOEN Short Single Expansion Anchor Zamac Alloy 5/8 BC-62AES (Box of 25)Please see the specifications in the spec sheet for full details (if spec sheet is not available, please email us and we will provide). If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forgi


SHORPIOEN Short Single Expansion Anchor Zamac Alloy 5/16 BC-31AES (Box of 50)
By Shorpioen
In Stock
$42.48

mpn: BC-31AES,

4.3 out of 5 stars with 11 reviews
SHORPIOEN Short Single Expansion Anchor Zamac Alloy 5/16 BC-31AES (Box of 50)Please see the specifications in the spec sheet for full details (if spec sheet is not available, please email us and we will provide). If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forg


Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" (250)
By RAW PRODUCTS CORP
In Stock
$154.55

mpn: 1044-002-0008,

4.8 out of 5 stars with 54 reviews
Double expansion shield anchors are best suited to anchor into materials of questionable strength such as soft or low quality materials. The anchor is designed to expand upon its entire length, maximizing friction and holding power even in low quality or suspect materials. These anchors can also be used in brick, block and stone as well. The zinc plating offers a layer of corrosion resistance to plain alloy steel.1/4'' zinc plated double expansion shield anchors consist of two expansion cones an


Index Fixing Systems Taen - Pack of 500 Screws autotaladrantes of Raised Head Low, Footprint Phillips and Washer Stamped Screw (Coating) Black, TAEN4232
By INDEX Fixing Systems
In Stock
$48.60

mpn: TAEN4232, ean: 8423533138606,

4.1 out of 5 stars with 59 reviews
Index Fixing Systems TAEN - Pack of 500 screws autotaladrantes of Raised Head Low, Footprint Phillips and Washer Stamped Screw (Coating) Black, TAEN4232INDEX Fixing Systems.


Fischer - Duopower Cube 8 x 40 + Free Flexometer (400 Units), 546162
By Fischer
In Stock
$53.70

ean: 4048962327304,

4.7 out of 5 stars with 22 reviews
Fischer duopower 8x40 cube cube cube cube with gift flexometer; for DIY enthusiasts, reform and repair comes its new format; the duo can be used on all solid, hollow surfaces and even cardboard-plaster; providing loads of up to 110 kg per anchor point.Duopower wall 8x40 in cube format of 400 units with gift flexometer. Princess applications, depending on its diameter: shelves, lamps, thermals, paintings and passes, among others.. Duopower 8x40 fischer plug with 2k technology (perfect fusion of n


3/8" x 7", Powers Power-Stud+ SD1 Strength Design Wedge Expansion Anchors, Carbon Steel Zinc Plated, 50/Bx
By Powers Fasteners
In Stock
$45.50
$37.74
You Save: 17%

mpn: 7417SD1,

4.3 out of 5 stars with 49 reviews
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and un-cracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included.ICC-ES ESR 2818 - Category 1, Cracked and Uncracked Concrete. ICC-ES ESR 2966 - Concrete Mason


Box of 20 HILTI 286031 KB3 304SS KWIK Bolt II Stainless Expansion Anchor 1INX9IN
By HILTI
In Stock
$384.74

mpn: D725442-286031 KB3 304SS,

4.2 out of 5 stars with 39 reviews
BOX OF 20 HILTI 286031 KB3 304SS KWIK BOLT II STAINLESS EXPANSION ANCHOR 1INX9IN 4 BOXES OF 5CUSTOM IDENTIFIER: HILTI 286031 KB3 304SS D725442.


Hard-to-Find Fastener 014973269661 Lag Expansion Shields, 5/8 Long, Piece-25
By Hard-to-Find Fastener
In Stock
$59.97
$59.84

mpn: ESAS-118-25, ean: 0738287041897,

4.8 out of 5 stars with 55 reviews
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get th


3/4" x 6-1/4", Powers Power-Stud+ SD1 Strength Design Wedge Expansion Anchors, Carbon Steel Zinc Plated, 20/Bx
By Powers Fasteners
In Stock
$44.59

mpn: 7444SD1,

4.5 out of 5 stars with 47 reviews
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and un-cracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included.ICC-ES ESR 2818 - Category 1, Cracked and Uncracked Concrete. ICC-ES ESR 2966 - Concrete Mason


Box of 5 HILTI 286031 KB3 304SS KWIK Bolt II Stainless Expansion Anchors 1INX9IN
By HILTI
In Stock
$120.68

mpn: D725239-286031 KB3 304SS,

4.7 out of 5 stars with 52 reviews
BOX OF 5 HILTI 286031 KB3 304SS KWIK BOLT II STAINLESS EXPANSION ANCHORS 1INX9INCUSTOM IDENTIFIER: HILTI 286031 KB3 304SS D725239.


CONFAST 3/8" Lag Shield Anchor Short (50 per Box)
By CONFAST
In Stock
$29.98

mpn: LSS38,

4.6 out of 5 stars with 45 reviews
ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1-3/4''. Therefore, the anchor



Viewing Page 1 of 2