Concrete Screws / Screws - Super Savings! Save up to 31%


Super Savings! Up to 31% off on Concrete Screws (in Screws) at Kokos Lock & Key [246]. Top brands include Simpson Strong-Tie, ITW/Buildex, CONFAST, Hard-to-Find Fastener, ITW RED HEAD, SAMMYS, RED HEAD, Sammys, & HILTI. Hurry! Limited time offers. Offers valid only while supplies last.



Simpson Strong Tie THD50500H 1/2-Inch by 5-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack
By Simpson Strong-Tie
In Stock
$42.37
$35.31
You Save: 17%

mpn: THD50500H, ean: 0707392708414,

4.6 out of 5 stars with 36 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head stamp


1/4" x 3-3/4" 410 Stainless Steel Flat Phillips Tapcon
By ITW/Buildex
In Stock
$78.98

mpn: SPF4-334, ean: 0092097909564,

4.9 out of 5 stars with 46 reviews
ApplicationsThe anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Moist environment.Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/16'' hole to be drilled in the base material (Concrete, Block, and Brick). The


CONFAST 1/4" x 5" Hex Head Concrete Screw Anchor with Drill Bit (100 per Box)
By CONFAST
In Stock
$38.99

mpn: CSH145,

4.2 out of 5 stars with 32 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry environment.Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/16'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit tha


Hard-to-Find Fastener 014973192648 Stainless Phillips Tapcon, 1/4 x 1-3/4-Inch, 50-Piece
By Hard-to-Find Fastener
In Stock
$48.20

mpn: 14973192648, ean: 0014973192648,

4.9 out of 5 stars with 51 reviews
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get th


Simpson Strong Tie TTN25500PF 1/4-Inch by 5-Inch Titen Concrete and Masonry Screw with Phillips Head, Blue
By Simpson Strong-Tie
In Stock
$42.99
$32.99
You Save: 23%

mpn: TTN25500PF, ean: 0707392214618,

4.4 out of 5 stars with 24 reviews
Titen concrete and masonry screws are 3/16-inch and 1/4-inch diameter hardened screws for attaching all types of components to concrete and masonry. Available in hex and phillips head designs in standard blue, white and 410 stainless steel. Use with appropriately sized Titen drill bits included in each box. Bulk packages of 1,000 screws do not include a bit.H suffix for hex head. PF suffix for phillips head. B suffix bulk packages of 1,000 do not include a bit. Heat treated carbon steel.


Red Head HW4-314 Tapcon Hex Washer Head 1/4-Inch by 3-1/4-Inch Anchor (100 per Box)
By ITW RED HEAD
In Stock
$30.60
$21.05
You Save: 31%

mpn: IRHHW4314, ean: 0092097951464,

4.8 out of 5 stars with 34 reviews
ITW Red Head Tapcon, Type: Tapcon, Style: Masonry anchors Climaseal coated, Size: 1/4'' x 3 1/4'', Package Quantity: 100 per boxCuts it's Own Threads into Concrete. Fast and Easy Installation - Three Anchors per Minute. Hex Head is Available for Majority of Anchoring Needs. Climaseal Coating for Corrosion Resistance. No Hole Spotting or Inserts Required.


Simpson Strong Tie TTN25334H 1/4-Inch by 3-3/4-Inch Titen Concrete and Masonry Screw with 3/16-Inch Hex Head, Blue
By Simpson Strong-Tie
In Stock
$29.25

mpn: TTN25334H, ean: 0044315596612,

4.3 out of 5 stars with 44 reviews
Titen concrete and masonry screws are 3/16-inch and 1/4-inch diameter hardened screws for attaching all types of components to concrete and masonry. Available in hex and phillips head designs in standard blue, white and 410 stainless steel. Use with appropriately sized Titen drill bits included in each box. Bulk packages of 1,000 screws do not include a bit.H suffix for hex head. PF suffix for phillips head. Heat treated carbon steel.


Simpson Strong Tie THD37600H 3/8" x 6" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 50 per Box
By Simpson Strong-Tie
In Stock
$77.99

mpn: THD37600H, ean: 0707392402701,

4.2 out of 5 stars with 35 reviews
The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. The high strength, easy to install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self undercutting, non-expansion characteristics of the Titen HD an


Hard-to-Find Fastener 014973185589 185589 Hex Tapcon, 1/4 x 2-1/4"
By Hard-to-Find Fastener
In Stock
$45.91

mpn: 014973185589, ean: 0738287507799,

4.4 out of 5 stars with 58 reviews
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the


Simpson Strong Tie TTN25214PFSS 1/4-Inch by 2-1/4-Inch Grade 410 Titen Concrete and Masonry Screw with Phillips Head, Stainless Steel
By Simpson Strong-Tie
In Stock
$49.50

mpn: TTN25214PFSS, ean: 0707392366515,

4.5 out of 5 stars with 49 reviews
Titen concrete and masonry screws are 3/16-inch and 1/4-inch diameter hardened screws for attaching all types of components to concrete and masonry. Available in hex and phillips head designs in standard blue, white and 410 stainless steel. Use with appropriately sized Titen drill bits included in each box. Bulk packages of 1,000 screws do not include a bit.H suffix for hex head. PF suffix for phillips head. B suffix bulk packages of 1,000 do not include a bit. Heat treated carbon steel.


Simpson Strong Tie THD37600H 3/8" x 6" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 50 per Box
By Simpson Strong-Tie
In Stock
$71.99

mpn: THD37600H, ean: 0707392402718,

4.3 out of 5 stars with 27 reviews
The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. The high strength, easy to install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self undercutting, non-expansion characteristics of the Titen HD an


THD62800H 5/8" x 8" Titen HD Heavy Duty Screw Anchors 10/pk
By Simpson Strong-Tie
In Stock
$52.39

mpn: THD62800H, ean: 0707392827306,

4.0 out of 5 stars with 7 reviews
5/8 x 8 Titen HD Concrete Anchor Zinc Plated (10) - The TITEN HD® anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. The high strength, easy to install TITEN HD® anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-underc


Sammys 8058957-25 Vertical Anchor Super Screw with 1/4 in. Threaded Rod Fitting, 5/16 x 1 3/4, Concrete, 25 Piece
By SAMMYS
In Stock
$45.00

mpn: 8058957-25, ean: 0804595136652,

4.5 out of 5 stars with 43 reviews
This Sammys 8058957-25 Rod Hanger provides a secure anchor for threaded rods with its 1/4 in. female fitting on the screw head. The coarse threads of this fastener grip solidly into the overhead or on the ground concrete base and secure a tight connection between the rod and the base. Ultra-sturdy, highly durable and easy to use, it is the ideal choice for hanging sprinklers, pipes, electrical fixtures and HVAC equipment to cast in place concrete, precast concrete and open web joist.FOR VERTICAL


Red Head, SLDT-3850, Anchor, 410 SS, 3/8 x 5, PK40
By RED HEAD
In Stock
$165.07

mpn: SLDT-3850, ean: 0662520085884,

4.1 out of 5 stars with 45 reviews
Large Diameter Tapcon Anchor, Concrete Anchor, Head Style Hex Washer, 410 Stainless Steel, Anchor Dia. 3/8 In. , Length 5 In. , Max. Work Thickness 3-1/2 In. , Min. Embedment 1-1/2 In. , Racking, Shelving And Conveyers; Finished Head Eliminates Damage To Fork Lift Trucks; Corrosion Resistant, Package Quantity 40Fasteners. Country of Manufacture: United States. Manufacturer: Red Head.


Red Head HW4-500 Tapcon Hex Washer Head 1/4-Inch by 5-Inch Anchor (100 per Box)
By ITW RED HEAD
SKU: #IRHHW4500
In Stock
$46.55
$46.08
You Save: 1%

sku: IRHHW4500, mpn: HW4-500, ean: 0092097951495,

4.5 out of 5 stars with 45 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Blue Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry to Moist environment.Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/16'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled w


Sammys 8059957-25 Vertical Anchor Super Screw with 3/8 in. Threaded Rod Fitting, 5/16 x 1 3/4, for for Concrete, 25 Piece
By Sammys
In Stock
$46.37

mpn: 8059957-25, ean: 0804595136690,

4.3 out of 5 stars with 33 reviews
This Sammys 8059957-25 Rod Hanger provides a secure anchor for threaded rods with its 3/8 in. female fitting on the screw head. The coarse threads of this fastener grip solidly into the overhead or on the ground concrete base and secure a tight connection between the rod and the base. Ultra-sturdy, highly durable and easy to use, it is the ideal choice for hanging sprinklers, pipes, electrical fixtures and HVAC equipment to cast in place concrete, precast concrete and open web joist.FOR VERTICAL


Simpson Strong Tie TTN25234HSS 1/4-Inch by 2-3/4-Inch Grade 410 Titen Concrete and Masonry Screw with 3/16-Inch Hex Head, Stainless Steel
By Simpson Strong-Tie
In Stock
$52.50

mpn: TTN25234HSS, ean: 0707392827818,

4.4 out of 5 stars with 17 reviews
Titen concrete and masonry screws are 3/16-inch and 1/4-inch diameter hardened screws for attaching all types of components to concrete and masonry. Available in hex and phillips head designs in standard blue, white and 410 stainless steel. Use with appropriately sized Titen drill bits included in each box. Bulk packages of 1,000 screws do not include a bit.H suffix for hex head. PF suffix for phillips head. B suffix bulk packages of 1,000 do not include a bit. Heat treated carbon steel.


Red Head HW4-600 Tapcon Hex Washer Head 1/4-Inch by 6-Inch Anchor (100 per Box)
By ITW RED HEAD
In Stock
$51.91

mpn: HW4-600, ean: 0662520072815,

4.2 out of 5 stars with 8 reviews
From the manufacturer: Tapcon makes the ''original masonry'' anchor that cuts its own threads into concrete, brick, or block. Blue climaseal provides extended corrosion protection. Each boxes comes with 100 anchors and 1 carbide tipped tapcon drill bit. ITW tapcons are made in the USA. Specifications Fixture Thickness: 4-1/2'' - 5'' Recommended Tapcon Length: 6'' (152.4mm) Bit Length: 7-1/2'' (190.5mm)Cuts it's Own Threads into Concrete. Fast and Easy Installation - Three Anchors per Minut


Hilti 418045 1/4-Inch x 2 5/8-Inch Kwik Hus-EZ Concrete and Masonry Screw Anchor, 100-Pack
By HILTI
In Stock
$76.99

mpn: 418045, ean: 0743153799604,

4.6 out of 5 stars with 32 reviews
The Hilti Kwik HUS-EZ Screw Anchor is designed for use in base materials such as concrete (cracked, lightweight, lightweight over metal deck and uncracked) and grout-filled CMU masonry. This screw anchor passed the following test reports: COLA (City of Los Angeles), ICC-ES report (concrete), ICC-ES report (masonry), Nuclear (NQA-1) and Seismic. Also fits the following IBC compliances: IBC 2003, IBC 2006, IBC 2009 and IBC 2012.Highly productive solution for applications requiring an ICC approval


Hard-to-Find Fastener 014973192662 Stainless Phillips Tapcon, 1/4 x 2-3/4-Inch, 50-Piece
By Hard-to-Find Fastener
In Stock
$54.66
$54.57

mpn: 014973192662, ean: 0014973192662,

4.3 out of 5 stars with 46 reviews
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the



Viewing Page 1 of 2