Locknuts / Nuts - Mega Sale! Save up to 25%


Mega Sale! Up to 25% off on Locknuts (in Nuts) at Kokos Lock & Key [266]. Top brands include Disc-Lock, Newport Fasteners, ASPEN FASTENERS, Chenango Supply, ALBANYCOUNTYFASTENERS, Hard-to-Find Fastener, RAW PRODUCTS CORP, SMALLRIG, S-D-S Screws, Bolt Base, Swordfish, The Hillman Group, & Noble Global Distribution. Hurry! Limited time offers. Offers valid only while supplies last.



Disc-Lock Steel Hex Flange Vibration Proof Locknut Magni Finish, Thread Size 5/8"-18 UNF, 50 Pack
By Disc-Lock
In Stock
$47.25

mpn: NSF 207-01-565,

4.7 out of 5 stars with 47 reviews
The Disc-Lock Locking Nut is a free spinning, vibration proof locking nut, specifically designed to solve the problem of fastener failure, is a heavy duty structural self-locking product, which prevents loosening caused by shock or vibration in high stress applications. It is probably the most effective locking device for maintaining joint integrity in the world.Free spinning, vibration and shock proof lock nut. One piece assembly. Reuseable and easy to remove. Used in high stress, vibration sen


M3-0.5 Nylon Insert Locknuts/Steel/Zinc / DIN985 (Carton: 2,500 pcs)
By Newport Fasteners
In Stock
$48.99

mpn: 581943, ean: 8945136252850,

4.1 out of 5 stars with 24 reviews
Nylon Insert Locknuts, M3-0.5 Nylon Insert Locknuts / Steel / Zinc / DIN985DIN 985 Nylon Insert Stop Nuts. Property class 8 Steel. Proof Load: 800 N/mm2. Coarse Thread. Zinc Plated.


(3000 pcs) #4-40, Hex Nylon Insert Stop Lock Nuts, NTM and NTE Thin Series, AISI 304 Stainless Steel (18-8)
By ASPEN FASTENERS
In Stock
$126.25

mpn: ST029-440-003000,

4.2 out of 5 stars with 59 reviews
Diameter (Nominal): #4Thread Pitch: 40Thickness (Minimum): 0.094''Thickness (Maximum): 0.124''Across Flats: 1/4''Product Class: Internally Threaded FastenersOrder: Lock NutsCategory: Hex Nylon Insert Stop Lock NutsSystem of Measurement: US UnitsBrand: Aspen Fasteners®Drive Style: External Hex DriveThread Length: Full ThreadThread Direction: Right-Hand ThreadMaterial: Stainless SteelMaterial Grade: AISI 304 Stainless Steel (18-8)Coating: UncoatedStandards and Specifications: NTM and NTE Thin Ser


Stainless 3/8-24 x 4" Hex Head Bolts (3/4" to 5" Length in Listing), 304 Stainless Steel, SAE Fine Thread, 25 Pieces (3/8-24 x 4")
By Chenango Supply
In Stock
$38.00
4.8 out of 5 stars with 28 reviews
3/8-24 Hex Head Bolt, 18-8 stainless steel. Pack of 25. SAE Fine thread. Very good corrosion resistance. These are good for applications where they will be used outside.304 Series Stainless Steel, (18-8). Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B. 3/8-24 SAE Fine Thread. Great corrosion resistance for outside applications. 25 Pieces.


Break Away Nuts Tamper Proof Security Shear Nuts 304 Stainless Steel 1/4"-20 QTY 25
By ALBANYCOUNTYFASTENERS
In Stock
$46.79

ean: 0793244363863,

4.8 out of 5 stars with 53 reviews
Shear Nuts are conical nuts with coarse threads designed for a permanent installation where preventing tampering with the fastener assembly is important. Shear nuts get their name because of how they are installed. They require no special tool to install, however removal will be extremely difficult, if not impossible. Each nut consists of a conical section topped by a thin, threadless standard hex nut that snaps or shears off when the torque exceeds a certain point on the nut. The finished resul


Hard-to-Find Fastener 014973386771 Castle Nut, 12mm-1.25, Piece-6
By Hard-to-Find Fastener
In Stock
$39.67
$39.66

mpn: CSTLNS-078-6, ean: 0014973386771,

4.4 out of 5 stars with 47 reviews
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the o


Metric Nylon Insert Lock Nuts A2 Stainless Steel M2.5-0.45 QTY 1000
By RAW PRODUCTS CORP
In Stock
$85.80

ean: 0685717333483,

4.4 out of 5 stars with 29 reviews
Metric nylon insert lock nuts has a nylon polymer insert to prevent back-off by vibration. Also known as an elastic stop nut which has a plastic insert that becomes threaded as the screw to bolt is threaded onto the nut. This causes deforming in the plastic insert. The nylon insert locks the nut to the screw by forcing the bottom face of the screw to the top face of the nut threads increasing the friction at both ends and applies force against the screw or bolt. Nylon insert lock nuts are not ma


SMALLRIG Top Handle Grip Hot Shoe Cold Shoe Cheese Handle with Anti-Off Designed Cold Shoe Adapter+15mm Rod Clamp DSLR Camera - 2094
By SMALLRIG
In Stock
$49.99
$49.00
You Save: 2%

mpn: 2094-SR,

4.4 out of 5 stars with 8 reviews
SmallRig Cold Shoe Handle 2094 is designed for DSLR cameras and cages. It offers lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of a cameraman during shooting. Key Features: 1.It could be mounted on the hot shoe of the camera for handheld shooting. 2.It could be locked tight via a thumb screw manually and thus will not be loose. 3.Built-in cold shoe on the top of the handle is anti-off designed lest accessories with cold shoe


Stainless 1/2-13 x 4" Hex Head Bolts (3/4" to 5" Lengths Available in Listing), 304 Stainless Steel, 25 Pieces (1/2-13 x 4")
By Chenango Supply
In Stock
$39.99

mpn: S00-C080400,

4.8 out of 5 stars with 13 reviews
1/2-13 Hex Head Bolt, 18-8 stainless steel. Pack of 25. USS Coarse thread. Very good corrosion resistance. These are good for applications where they will be used outside.304 Series Stainless Steel, (18-8). Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B. 1/2-13 USS Coarse Thread. Great corrosion resistance for outside applications. 25 Pieces.


Nut for Bolts Nuts Lock Nuts Nylon Thread Bolt Lock Rose Jam Bolts and Nuts Kit T Nuts and More Thread Lock Assortment for Stainless Steel Screws Nylon Jam Hex Nuts 2-56 (500 Pcs) Super-Deals-Shop
By S-D-S Screws
In Stock
$46.10

ean: 0653829563821,

4.4 out of 5 stars with 48 reviews
Drive Size : 1/4'' Thread Size : 2-56 Quantity of Lock Nuts : 500 Material : Stainless Steel 18-8 Width - Flat to Flat : 1/4'' Height / Thickness : 9/64'' Width - Point to Point : 0.268'' Threads Per Inch (TPI) : 56 Coarse or Fine Thread : Coarse Thread Direction : Right Hand Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft washer, it can be used to make the small groove on the st


5/16"-24 Nylon Insert (Elastic) Stop Nuts - Locknuts, NE Series - Light Hex, Full Height, Grade A Steel, Zinc Plated (Quantity: 100)
By Newport Fasteners
In Stock
$22.99

mpn: NB305180P-100, ean: 8945136846301,

4.0 out of 5 stars with 58 reviews
Hex nut with a nylon filled collar at its back end. When a screw reaches the collar, the threads and nylon form a tight, frictional fit, restricting movement of the screw when it is subjected to vibration.Designed to be used with like material machine screws and bolts. It is able to be reused more times than a two-way reversible nut.. Also known as: Nylon Insert Stop Nuts, Nylock Nuts, Elastic Lock Nuts, Elastic Stop Nuts.


Bolt Base A2 Stainless Steel Nylon Insert Nyloc Nylock Lock Nuts Type P Thick M8 X 1.25mm Pitch - 100
By Bolt Base
In Stock
$34.22

mpn: BB6767, ean: 5055745067660,

4.3 out of 5 stars with 56 reviews
M8 Nyloc Nuts Type P - DIN 982, A2/70 Stainless Steel, Spanner/ Wrench Size- 13mm, Nut Height- 9.5mm, Thread Diameter- 8mm, Thread Pitch- 1.25mmCorrosion Resistant A2-70 Stainless Steel. Nyloc Nuts Thick- DIN 982. 8mm Metric Thread, M8 - 1.25mm Pitch. Ideal For A Wide Range Of Applications. Not Suitable For Replacing High Tensile Fasteners.


Swordfish 30450 - Stainless Steel Nylon Insert Lock Nut Assortment, SAE & Metric, [12 sizes], 300 pieces
By Swordfish
In Stock
$32.99

mpn: 30450, ean: 6958649430457,

4.8 out of 5 stars with 53 reviews
Swordfish 30450 - Stainless Steel Nylon Insert Lock Nut Assortment, SAE & Metric, [12 sizes], 300 piecesSAE:(25 pieces) #10-24(35 pieces) 1/4''-20(25 pieces) 1/4''-28(30 pieces) 5/16''-18(25 pieces) 3/8''-16(10 pieces) 1/2''-13METRIC:(25 pieces) M3 x 0.5(35 pieces) M4 x 0.7(25 pieces) M5 x 0.8(30 pieces) M6 x 1.0(25 pieces) M8 x 1.25(10 pieces) M10 x 1.5Kit includes 12 sizes popular SAE & Metric nylon insert lock nut for total of 300 pieces. Hex Nut with a nylon-filled collar at its back end. Wh


Hard-to-Find Fastener 014973237530 Fine Castle Nuts, 5/8-18, Piece-5
By Hard-to-Find Fastener
In Stock
$17.89
$13.36
You Save: 25%

mpn: CSTLN-006-5, ean: 0738287685428,

4.1 out of 5 stars with 58 reviews
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the


The Hillman Group 180376 1 1 1 1-14 All Metal Grade C Lock Nut, 10-Pack
By The Hillman Group
In Stock
$31.00
$29.91
You Save: 4%

mpn: 180376, ean: 0008236073737,

4.8 out of 5 stars with 7 reviews
All Metal Lock Nuts are nuts with a crowned top that is crimped to create the locking feature. These nuts are hardened to a Grade C strength level, which is equivalent to 150,000 psi/min Proof Load Strength. Grade C nuts are also recommended for use with A-325 structural bolts. Lock nuts provide excellent resistance to loosening in high vibration applications.All Metal Lock Nuts are one piece, all-metal prevailing torque hex nuts with a conical top and a flat bottom bearing surface with chamfere


Bolt Base A2 Stainless Steel Nylon Insert Nyloc Nylock Lock Nuts Type P Thick M6 X 1.0mm Pitch - 100
By Bolt Base
In Stock
$24.93

mpn: BB6761, ean: 5055745067608,

4.1 out of 5 stars with 56 reviews
M6 Nyloc Nuts Type P - DIN 982, A2/70 Stainless Steel, Spanner/ Wrench Size- 10mm, Nut Height- 8mm, Thread Diameter- 6mm, Thread Pitch- 1.0mmCorrosion Resistant A2-70 Stainless Steel. Nyloc Nuts Thick- DIN 982. 6mm Metric Thread, M6 - 1.0mm Pitch. Ideal For A Wide Range Of Applications. Not Suitable For Replacing High Tensile Fasteners.


Hard-to-Find Fastener 014973473792 Grade 8 Fine Lock Nuts, 5/8-18, Piece-25
By Hard-to-Find Fastener
In Stock
$26.25
$25.77
You Save: 2%

mpn: LNS8-135-25, ean: 0738287518726,

4.8 out of 5 stars with 28 reviews
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the


Hard-to-Find Fastener 014973270841 Castle Nuts, 12mm-1.75, Piece-8
By Hard-to-Find Fastener
In Stock
$28.87
$27.11
You Save: 6%

mpn: CSTLNS-081-8, ean: 0014973270841,

4.6 out of 5 stars with 57 reviews
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get th


5 Pc 1 1/4 Inch NPT Black Nylon Cable Gland Strain Relief with Gasket and Locknut 5 Pack
By Noble Global Distribution
In Stock
$26.99

mpn: 1 1/4 inch Cable Gland 5 Pack, ean: 0759119883027,

4.7 out of 5 stars with 60 reviews
1 1/4 inch Cable Gland 5 Pack Cable diameter approx - 0.86'' to 1.25'' Mounting hole 1.64'' Includes gasket and lock-nut Nylon is 66.94V-2 UL approved Fully certified IP 68 Nema 4X Guaranteed RoHS complianceFully certified IP 68 - Nema 4X. Guaranteed RoHS compliance. Nylon is 66.94V-2. Cable diameter approx - 0.86'' to 1.25''. UL approved.


Stainless 1/2-13 Wing Nut, 304 Stainless Steel, 25 Pieces (1/2-13 Wing Nut)
By Chenango Supply
In Stock
$32.63

mpn: S16-0813-25, ean: 0716715822911,

4.8 out of 5 stars with 24 reviews
All pictures represent actual product. Wing nuts are easy to use, hand twist to install or remove without tools. Stainless steel is anti-rust, durable and long lasting. Suitable for indoor or outdoor use.304 Series Stainless Steel, (18-8). Wing Nut, width: 1.94'' height: 1.0''. 1/2-13 USS Coarse Thread. Great corrosion resistance for outside applications. 25 Pieces.



Viewing Page 1 of 2