1/2'' x 3'' Sleeve Anchors/Hex Head/Steel/Zinc (Carton: 25 pcs) by Newport Fasteners at Kokos Lock & Key. MPN: 415057. Hurry! Limited time offer. Offer valid only while supplies last. Sleeve Anchors, 1/2'' x 3'' Sleeve Anchors / Hex Head / Steel / Zinc Applications The anchor is made from Zinc Plated Steel. This anchor is designed for use in Concrete, Block, and Brick. Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached. Hole Diameter/Bit Diameter The anchor requires a 1/2'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meet
Product Description & Reviews
Sleeve Anchors, 1/2" x 3" Sleeve Anchors / Hex Head / Steel / Zinc Applications The anchor is made from Zinc Plated Steel. This anchor is designed for use in Concrete, Block, and Brick. Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached. Hole Diameter/Bit Diameter The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Diameter of Anchor The diameter of the anchor is 1/2". Length Anchor The length of the anchor is 3" Minimum Embedment The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embediment of 1-1/2" will be met. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8". Spacing between Anchors Each anchor must be spaced a minimum distance of 5" from each other when measured center to center. Edge Distance It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.
Features & Highlights
- Hex Head
- Sleeve Anchors
- As head is turned clockwise, sleeve dilates against substrate
- For anchoring heavy equipments to concrete
- Threaded Bolt, Sleeve, Nut & Washer / All Steel Zinc Plate
Have questions about this item (415057), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Newport Fasteners, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: WKLS089-36, ean: 0765245258431,
Specification:Product Name: Universal Swivelling RingStandard: Metric, Material: 304 A2 Stainless SteelSurface Treatment: Polishing treatmentPackaging: Plastic PackagingPackage including:According to your choose,Fast Shipping Guarantee: All your parc...
Hex nut Sleeve Anchor Zinc A device for giving stability to one part of a structure by making it fast to another consisting of a threaded stud with a conical end flared outward; a hollow, cylindrical dilating sleeve assembled over the stud and positi...
mpn: WKLS107-48, ean: 0728376482847,
Stand：Metric,Material：304 A2 StainlessType：Concrete AnchorsTreatment：No-treatmentPackaging：Plastic PackagingSize eg: M6*100(Thread Diameter=6mm; Length=100mm).Fast Shipping Guarantee: All your parcel will be delivered in 7-15 daysMaterial: ...
mpn: 05005S, ean: 0075352776897,
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the follo...